阅读:1725回复:3
有关驱动程序安装的问题
对于用driverworks wizard 生成的*.inf文件,要做怎样的修改,才能将相应的驱动程序安装上,谢谢!
|
|
沙发#
发布于:2002-11-13 10:59
0,怎么每分?
|
|
|
板凳#
发布于:2002-11-13 10:32
不错
|
|
地板#
发布于:2001-05-12 17:09
在inf中如下修改就可以了:
IOConfig=4@0234-0237%ffff(ffff::) ;; TODO: You must replace START and END in the line above with the correct I/O addresses (hex). ;;If the device decodes only 10 bits of I/O, replace ffff ;;with 3ff. IOConfig=2@022A-022B%ffff(ffff::) ; IoPortRange1; ;; TODO: You must replace START and END in the line above with the correct I/O addresses (hex). ;; If the device decodes only 10 bits of I/O, replace ffff with 3ff. DMAConfig=W:6 ;; TODO: You must replace DMACHANNEL in the line above ;;with the correct channel for your device. ;;For channels 4-7 prefix the channel number with "W:", ;;e.g. DMAConfig = W:5 其他的修改可以看文件中的提示。 如果不行将你的要求和inf发给我。 |
|