关于ndisprot 在2003系统上的问题

最近我编译了DDK 中ndisprot 协议驱动修改了NDIS_PROTOCOL_CHARACTERISTICS 的代码。

用WDk编译成2003 环境成功，但在用ndisprot.inf 安装到虚拟机上以后没任何提示，只是本地连接属性里多了个 Sample NDIS Protocol Driver  。

  我用windug在虚拟机上调试发现  NDIS_PROTOCOL_CHARACTERISTICS  里注册的一些函数都没有调用(如 ProtocolBindAdapter) 而我自己定义的回调函数没问题(如 DispatchIoctl)。

  我的入口点代码是
        // 初始化协议特征结构
        
NDIS_PROTOCOL_CHARACTERISTICS  protocolChar;
NdisZeroMemory(&protocolChar, sizeof(NDIS_PROTOCOL_CHARACTERISTICS));

//protocolChar
protocolChar.Ndis40Chars.MajorNdisVersion =5;
protocolChar.Ndis40Chars.MinorNdisVersion  = 0;

protocolChar.Ndis40Chars.Name = protoName;

protocolChar.Ndis40Chars.BindAdapterHandler = ProtocolBindAdapter;
protocolChar.Ndis40Chars.UnbindAdapterHandler = ProtocolUnbindAdapter;

protocolChar.Ndis40Chars.OpenAdapterCompleteHandler  = ProtocolOpenAdapterComplete;
protocolChar.Ndis40Chars.CloseAdapterCompleteHandler = ProtocolCloseAdapterComplete;

protocolChar.Ndis40Chars.ReceiveHandler                              = ProtocolReceive;
protocolChar.Ndis40Chars.TransferDataCompleteHandler  = ProtocolTransferDataComplete;

protocolChar.Ndis40Chars.SendCompleteHandler              = ProtocolSendComplete;


protocolChar.Ndis40Chars.ResetCompleteHandler            = ProtocolResetComplete;
protocolChar.Ndis40Chars.RequestCompleteHandler        = ProtocolRequestComplete;

protocolChar.Ndis40Chars.ReceiveCompleteHandler        = ProtocolReceiveComplete;
protocolChar.Ndis40Chars.StatusHandler                              = ProtocolStatus;
protocolChar.Ndis40Chars.StatusCompleteHandler            = ProtocolStatusComplete;
protocolChar.Ndis40Chars.PnPEventHandler        = ProtocolPNPHandler;

        // 注册为协议驱动
        NdisRegisterProtocol((PNDIS_STATUS)&status,
            &g_data.hNdisProtocol, &protocolChar, sizeof(protocolChar));
        if(status != NDIS_STATUS_SUCCESS)
        {
            status = STATUS_UNSUCCESSFUL;
            break;
        }
        DbgPrint(" Protocol: NdisRegisterProtocol success \n");

        // 现在，设置我们要处理的派遣例程

        pDriverObj->MajorFunction[IRP_MJ_CREATE] = DispatchCreate;
        pDriverObj->MajorFunction[IRP_MJ_CLOSE] = DispatchClose;
        pDriverObj->MajorFunction[IRP_MJ_READ]  = DispatchRead;
        pDriverObj->MajorFunction[IRP_MJ_WRITE]  = DispatchWrite;
        pDriverObj->MajorFunction[IRP_MJ_CLEANUP]  = DispatchCleanup;

        pDriverObj->MajorFunction[IRP_MJ_DEVICE_CONTROL] = DispatchIoctl;
        pDriverObj->DriverUnload = DriverUnload;    



  不知道是什么原因...请高手指教........

NdisRegisterProtocol((PNDIS_STATUS)&status,
            &g_data.hNdisProtocol, &protocolChar, sizeof(protocolChar));
修改为：
NdisRegisterProtocol(
            (PNDIS_STATUS)&status,
            &Globals.NdisProtocolHandle,
            &protocolChar,
            sizeof(NDIS50_PROTOCOL_CHARACTERISTICS));