驱动中牛
- 注册日期2002-04-02
- 最后登录2003-06-25
- 粉丝0
- 关注0
- 积分0分
- 威望0点
- 贡献值0点
- 好评度0点
- 原创分0分
- 专家分0分
|
没有啊，是下面的哪部分？
; -- NETSF.INF --
;
; Passthru driver INF file - this is the INF for the service (protocol)
; part.
;
; Copyright (c) 1993-2001, Microsoft Corporation
;
; ----------------------------------------------------------------------
; Notes:
; 0. The term \"filter\" is used in this INF to refer to an NDIS IM driver that
; implements a 1:1 relationship between upper and lower bindings.
;
; 1. Items specifically required for a filter have been marked with
; \"!!--Filter Specific--!!\" keyword
; 2. In general a filter DOES NOT require a notify object for proper installation.
; A notify object is only required if one wants to have better control
; over binding operations or if one wants to receive notifications
; when other components get installed/removed/bound/unbound.
; Since Windows 2000 systems do not have support for CopyINF directive,
; a notify object is required to programmatically copy the miniport INF
; file to the system INF directory. Previous versions of this INF file
; erroneously used to copy the INF files directly by using the CopyFiles
; directive.
; On Windows XP, you can install a filter IM without a notify object.
; by following the instructions in (4).
;
; 3. If you want to use this INF file with your own IM driver, please
; make the following modifications:
; File netsf.inf
; --------------
; a. In section [SourceDiskFiles] and [Passthru.Files.Sys]
; change passthru.sys to the name of your own driver binary.
; b. In section [Passthru.ndi.AddReg], change values of
; BindForm and MiniportId to appropriate values.
; File netsf_m.inf
; ----------------
; a. Replace MS_PassthruMP with InfId of your miniport.
; b. In section [PassthruMP.AddService],
; change ServiceBinary appropriately.
; c. In section [PassthruMP.ndi.AddReg],
; change \"Passthru\" in the line having \"Service\"
; to reflect the appropriate name
;
; 4. If you want to use this INF for installing the passthru IM without
; the notify object, do the following:
; a. In section [Passthru.ndi.AddReg],
; Comment out lines having ClsId and ComponentDll
; b. In section [Passthru.ndi],
; change the value of Characteristics so that it does not have
; the NCF_HAS_UI flag
; c. In section [SourceDiskFiles], comment out the line having passthru.dll
; d. In section [Passthru.ndi], remove Passthru.Files.Init from the
; CopyFiles line.
;
; ----------------------------------------------------------------------
[Version]
Signature = \"$Windows NT$\"
Class = NetService
ClassGUID = {4D36E974-E325-11CE-BFC1-08002BE10318}
Provider = %Msft%
DriverVer = 06/24/1999,5.00.2071.1
[Manufacturer]
%Msft% = MSFT
[ControlFlags]
;=========================================================================
;
;=========================================================================
[MSFT]
%Passthru_Desc% = Passthru.ndi, ms_passthru
[Passthru.ndi]
AddReg = Passthru.ndi.AddReg, Passthru.AddReg
Characteristics = 0x4490 ; NCF_HAS_UI | NCF_FILTER | NCF_NO_SERVICE | NCF_NDIS_PROTOCOL !--Filter Specific--!!
CopyFiles = Passthru.Files.Init, Passthru.Files.Sys
CopyInf = netsf_m.inf
[Passthru.ndi.Remove]
DelFiles = Passthru.Files.Init, Passthru.Files.Sys
[Passthru.ndi.Remove.Services]
DelService = Passthru
; ----------------------------------------------------------------------
; File copy
;
[SourceDisksNames]
1=%DiskDescription%,\"\",,
[SourceDisksFiles]
passthru.dll=1
passthru.sys=1
netsf_m.inf=1
[DestinationDirs]
DefaultDestDir = 12
Passthru.Files.Init = 11 ; %windir%\\System32
Passthru.Files.Sys = 12 ; %windir%\\System32\\drivers
; Copying of passthru.dll is required only if the filter has a Notify object
[Passthru.Files.Init]
passthru.dll,,,2
[Passthru.Files.Sys]
passthru.sys,,,2
[InfSourcePathInfo]
; Used by the notify object to figure out where the original media is
; located (so it can use SetupCopyOEMInf to install Net INF located
; there).
OriginalInfSourcePath = %1%
; ----------------------------------------------------------------------
; Filter Install
;
[Passthru.ndi.AddReg]
HKR, Ndi, HelpText, , %Passthru_HELP%
; ----------------------------------------------------------------------
; Keys required if a Notify object is present
; These keys should be omitted if the Filter does not have any Notify object
;
; Note:
; 1. Only include the following lines if your filter has configuration UI
; that needs to be displayed. Otherwise, you should not need a notify
; object.
; 2. If you write your own notifyobject, use a different GUID for ClsID!!
; (Generate this with uuidgen.exe)
;
HKR, Ndi, ClsID, , {df2e4f67-e93a-11d1-bb14-0000f8779051}
HKR, Ndi, ComponentDll, , passthru.dll
; ----------------------------------------------------------------------
; !!--Filter Specific--!!
;
; Note:
; 1. Other components may also have UpperRange/LowerRange but for filters
; the value of both of them must be noupper/nolower
; 2. The value FilterClass is required.
; 3. The value Service is required
; 4. FilterDeviceInfId is the InfId of the filter device (miniport) that will
; be installed for each filtered adapter.
; In this case this is ms_passthrump (refer to netsf_m.inf)
;
HKR, Ndi, FilterClass, , failover
HKR, Ndi, FilterDeviceInfId, , ms_passthrump
HKR, Ndi, Service, , Passthru
HKR, Ndi\\Interfaces, UpperRange, , noupper
HKR, Ndi\\Interfaces, LowerRange, , nolower
HKR, Ndi\\Interfaces, FilterMediaTypes, , \"ethernet, tokenring, fddi, wan\"
[Passthru.AddReg]
; The following key is Required
; The following key is Passthru specific
HKR, Parameters, Param1, 0, 4
; ----------------------------------------------------------------------
[Strings]
Msft = \"Microsoft\"
DiskDescription = \"Microsoft Passthru Driver Disk\"
Passthru_Desc = \"Passthru Driver\"
Passthru_HELP = \"Passthru Driver\"
|
