windows wdm 设备驱动程序开发指南（chris cant 著），在安装此书配套光盘软件时出现问题，在编译Wdm1时出现问题：

我购买了windows wdm 设备驱动程序开发指南（chris cant 著），在安装此书配套光盘软件时出现问题，在编译Wdm1时出现问题：
“\'MakeDrvr\' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
Error executing c:\\winnt\\system32\\cmd.exe.

Wdm1.sys - 1 error(s), 0 warning(s)”
请教大虾！送分喔！







 

我在刚刚读那本书的时候，也用他那个makedrv，后来总感觉有些问题。我想你完全可以，只用DDK的命令嘛。
在你的AUTOEXEC。BAT中设PATH＝C:\\98ddk
在你的DRIVER文件夹下，先设置环境setenv
然后build 就OK 了
good luck

我是在driverstudio+vc环境下做的，而且它的wdm1工程下包括了makedrvr.bat文件，不知如何处理？我是windows2000的wdm

I always develop drivers with 98DDK rather than Driverstudio.According to my own understanding,I think there are many own \"classes\" and \"functions\" in Numega\'s Driverstudio.However,the \"wdm1\" is composed of \"DDK pure code\",so I think there must be some problems when you compiled and linked the wdm1 with driverstudio+VC.
If you have to compile with VC++ IDE,I think that you could change some settings in the enviroment.You can refer to Chapter 4.7 of \"Chris Cant\'s Book\".
Good Luck!

hi,herosky, I am full of gratitude to you for helping me .
i am in NANJING.Where r u?
my email:glp2000311@hotmail.com.

hehe.
We are all angels with one single wing.Only we help each other,then we can go further and fly higher.
:)
Glad to share experience with you.
I am in Dalian.
My email:cxh@dlmu.edu.cn

 在vc 6。0 下，tools->option->Directories 下，

添加 c:\\wdmbook 到 Executable dir 项目中。

我也刚刚遇到这个问题。