求Mini PCI 脚位分布图.

很急!很急!
谢谢!!!!!!!!!!!!

Pin Name Description Note
A1 +3,3V +3.3 VDC
A2 AD2 Address 2
A3 AD6 Address 6
A4 GND Ground
A5 AD10 Address 10
A6 AD13 Address 13
A7 GND Ground
A8 SDONE Snoop Done 1
A9 GND Ground
A10 FRAME# Indicate Address or Data phase 1
A11 AD18 Address 18
A12 GND Ground
A13 +5V +5 VDC
A14 AD24 Address 24
A15 AD27 Address 27
A16 GND Ground
A17 IDSEL0 IDSEL0 1
A18 GND Ground
A19 CLK1 33 or 66 MHz Clock
A20 GND Ground
A21 GND Ground
A22 GND Ground
A23 GND Ground
A24 +3,3V +3.3 VDC
B1 REQ64# Request 64 ??? 1
B2 AD3 Address 3
B3 +5V +5 VDC
B4 AD8 Address 8
B5 +3,3V +3.3 VDC
B6 AD14 Address 14
B7 PAR Parity
B8 +3,3V +3.3 VDC
B9 STOP# Stop 1
B10 C/BE2# Command, Byte Enable 2
B11 V(I/O) +3.3 or +5 VDC
B12 AD21 Address 21
B13 +3,3V +3.3 VDC
B14 V(I/O) +3.3 or +5 VDC
B15 AD28 Address 28
B16 AD31 Address 31
B17 +3,3V +3.3 VDC
B18 GND Ground
B19 RST# Reset
B20 NMI# Non Maskable Interrupt
B21 X6 Reserved (6)
B22 +5V +5 VDC :
B23 RSTIN#
B24 USB+ Universal Serial Bus (USB)(+)
C1 ACK64# Acknowledge 64 ??? 1
C2 GND Ground
C3 AD7 Address 7
C4 AD9 Address 9
C5 AD11 Address 11
C6 GND Ground
C7 SERR# System Error 1
C8 PERR# Parity Error 1
C9 DEVSEL# Device Select 1
C10 GND Ground
C11 AD19 Address 19
C12 AD22 Address 22
C13 GND Ground
C14 AD25 Address 25
C15 GND Ground
C16 X1 Reserved (1)
C17 IDSEL1 Initialization Device Select 1
C18 GND Ground
C19 SLEEP#/SDAT Sleep/Serial Data (I2C)
C20 X4 Reserved (4)
C21 INTD# Interrupt D 1
C22 INTB# Interrupt B 1
C23 +5V +5 VDC
C24 USB- Universal Serial Bus (USB)(-)
D1 AD0 Address 0
D2 AD4 Address 4
D3 C/BE0# Command, Byte Enable 0
D4 +3,3V +3.3 VDC
D5 AD12 Address 12
D6 AD15 Address 15
D7 V(I/O) +3.3 or +5 VDC
D8 LOCK# Resource Lock 1
D9 TRDY# Test Logic Ready 1
D10 AD16 Address 16
D11 AD20 Address 20
D12 +5V +5 VDC
D13 +5V +5 VDC
D14 AD26 Address 26
D15 AD29 Address 29
D16 REQ1 Request 1 1
D17 IDSEL2 Initialization Device Select 2
D18 V(I/O) +3.3 or +5 VDC
D19 X2 Reserved (2)
D20 X5 Reserved (5)
D21 +3,3V +3.3 VDC
D22 INTA# Interrupt A 1
D23 ICPEN#/SCLK ICPEN/Serial Clock (I2C) 3
D24 OSC (PWDN)
E1 AD1 Address 1
E2 AD5 Address 5
E3 GND Ground
E4 M66EN Enable 66Mhz PCI-bus
E5 GND Ground
E6 C/BE1# Command, Byte Enable 1
E7 SBO# Snoop Backoff 1
E8 +5V +5 VDC
E9 IRDY# Initiator Ready 1
E10 AD17 Address 17
E11 GND Ground
E12 AD23 Address 23
E13 C/BE3# Command, Byte Enable 3
E14 GND Ground
E15 AD30 Address 30
E16 GNT1 Grant 1
E17 +5V +5 VDC
E18 GNT4 Grant 4
E19 X3 Reserved (3)
E20 GND Ground
E21 INTC# Interrupt C 1
E22 -12V -12 VDC
E23 +12V +12 VDC
E24 VBATT
1 = Pullup resistor of 2,7 kOhm on the System Slot (CPU).

Information from The Hardware Book

谢谢，请问这是MINI PCI哪个规格的分布图，是MINIPCI TYPE I 还是MINIPCI TYPE II 或者是MINIPCI TYPE III。有没有MINIPCI TYPE III 规格的标准脚位分布图。