|
2260楼#
发布于：2005-03-28 14:35
Commands are written to the command register
using standard microprocessor write timings. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. :D ;) |
|
|
2261楼#
发布于：2005-03-28 14:35
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2262楼#
发布于：2005-03-28 14:35
Commands are written to the command register
using standard microprocessor write timings. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. :o |
|
|
2263楼#
发布于：2005-03-28 14:35
Commands are written to the command register
using standard microprocessor write timings. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. :) :D |
|
|
2264楼#
发布于：2005-03-28 14:36
The device requires only a single 3.0 volt power supply
for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. :o :mad: :D :P :mad: :cool: |
|
|
2265楼#
发布于：2005-03-28 14:36
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2266楼#
发布于：2005-03-28 14:36
The device requires only a single 3.0 volt power supply
for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. :D :cool: :o :) |
|
|
2267楼#
发布于：2005-03-28 14:36
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2268楼#
发布于：2005-03-28 14:36
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2269楼#
发布于：2005-03-28 14:36
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2270楼#
发布于：2005-03-28 14:36
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2271楼#
发布于：2005-03-28 14:36
Write cycles also internally latch addresses and data
needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices. :D :cool: :P :( |
|
|
2272楼#
发布于：2005-03-28 14:37
Write cycles also internally latch addresses and data
needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices. :o |
|
|
2273楼#
发布于：2005-03-28 14:37
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2274楼#
发布于：2005-03-28 14:37
anThe device offers access times of 70, 80, 90, and 120 ns,
allowing high speed microprocessors to operate without wait states. :cool: |
|
|
2275楼#
发布于：2005-03-28 14:38
and 48-pin
TSOP packages. The word-wide data (x16) appears on DQ15 |
|
|
2276楼#
发布于：2005-03-28 14:39
Write cycles also internally latch addresses and data
needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices. :D :cool: :P :( :D |
|
|
2277楼#
发布于：2005-03-28 14:39
Write cycles also internally latch addresses and data
needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices. ;) ;) :cool: :P |
|
|
2278楼#
发布于：2005-03-28 14:39
Write cycles also internally latch addresses and data
needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices. :o :) :mad: |
|
|
2279楼#
发布于：2005-03-28 14:41
Commands are written to the command register
using standard microprocessor write timings. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. :D ;) :P :mad: :mad: |
|