|
2660楼#
发布于：2005-03-29 09:18
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :o :o :mad: :o :D |
|
|
2661楼#
发布于：2005-03-29 09:19
After an erase command sequence is written, if all
sectors selected for erasing are protected, :) :) :mad: |
|
|
2662楼#
发布于：2005-03-29 09:19
After an erase command sequence is written, if all
sectors selected for erasing are protected, :o |
|
|
2663楼#
发布于：2005-03-29 09:19
After an erase command sequence is written, if all
sectors selected for erasing are protected, :P :mad: :( ;) :cool: :mad: |
|
|
2664楼#
发布于：2005-03-29 09:19
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2665楼#
发布于：2005-03-29 09:19
After an erase command sequence is written, if all
sectors selected for erasing are protected, :o :cool: |
|
|
2666楼#
发布于：2005-03-29 09:19
During the Embedded Program algorithm, the device
outputs on DQ7 the complement of the datum programmed to DQ7. This DQ7 status also applies to programming during ;) :cool: :o |
|
|
2667楼#
发布于：2005-03-29 09:20
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2668楼#
发布于：2005-03-29 09:20
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2669楼#
发布于：2005-03-29 09:20
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2670楼#
发布于：2005-03-29 09:21
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. ;) ;) :mad: |
|
|
2671楼#
发布于：2005-03-29 09:21
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :D |
|
|
2672楼#
发布于：2005-03-29 09:21
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :cool: |
|
|
2673楼#
发布于：2005-03-29 09:24
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2674楼#
发布于：2005-03-29 09:24
After an erase command sequence is written, if all
sectors selected for erasing are protected, :) :) :mad: :D |
|
|
2675楼#
发布于：2005-03-29 09:24
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2676楼#
发布于：2005-03-29 09:26
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :D :D :o :D |
|
|
2677楼#
发布于：2005-03-29 09:27
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2678楼#
发布于：2005-03-29 09:28
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2679楼#
发布于：2005-03-29 09:28
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :D :D :o :D :mad: |
|