|
2720楼#
发布于：2005-03-29 09:58
After an erase command sequence is written, if all
sectors selected for erasing are protected, :P :mad: |
|
|
2721楼#
发布于：2005-03-29 09:58
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :cool: :o :P :o :o :o |
|
|
2722楼#
发布于：2005-03-29 10:01
The system
must provide the program address to read valid status information on DQ7. :D :mad: :D :mad: :mad: :mad: :mad: |
|
|
2723楼#
发布于：2005-03-29 10:03
Table 10 shows the outputs for Toggle Bit I on DQ6.
Figure 6 shows the toggle bit algorithm in flowchart form, and the section :P :o :P :o :P |
|
|
2724楼#
发布于：2005-03-29 10:03
Table 10 shows the outputs for Toggle Bit I on DQ6.
Figure 6 shows the toggle bit algorithm in flowchart form, and the section :D :D :mad: |
|
|
2725楼#
发布于：2005-03-29 10:04
The system
must provide the program address to read valid status information on DQ7. :D |
|
|
2726楼#
发布于：2005-03-29 10:05
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. ;) ;) :mad: :o :D :cool: |
|
|
2727楼#
发布于：2005-03-29 10:05
The system
must provide the program address to read valid status information on DQ7. ;) :cool: :cool: :cool: :o |
|
|
2728楼#
发布于：2005-03-29 10:06
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :mad: :mad: :mad: :D :mad: :mad: ;) :mad: :D |
|
|
2729楼#
发布于：2005-03-29 10:06
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. ;) ;) :mad: :o :D :cool: :o :o :cool: |
|
|
2730楼#
发布于：2005-03-29 10:06
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :o :o :mad: :o :D :mad: ;) :mad: ;) |
|
|
2731楼#
发布于：2005-03-29 10:06
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :mad: :mad: :mad: :D :mad: :mad: |
|
|
2732楼#
发布于：2005-03-29 10:06
After an erase command sequence is written, if all
sectors selected for erasing are protected, :P :mad: :( ;) :cool: |
|
|
2733楼#
发布于：2005-03-29 10:06
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :o |
|
|
2734楼#
发布于：2005-03-29 10:07
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :mad: :mad: :mad: :D |
|
|
2735楼#
发布于：2005-03-29 10:07
The system
must provide the program address to read valid status information on DQ7. ;) |
|
|
2736楼#
发布于：2005-03-29 10:07
After an erase command sequence is written, if all
sectors selected for erasing are protected, :P |
|
|
2737楼#
发布于：2005-03-29 10:07
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2738楼#
发布于：2005-03-29 10:07
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2739楼#
发布于：2005-03-29 10:07
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. ;) ;) :mad: :o |
|