|
2740楼#
发布于：2005-03-29 10:08
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) |
|
|
2741楼#
发布于：2005-03-29 10:08
The system
must provide the program address to read valid status information on DQ7. :D :mad: :D |
|
|
2742楼#
发布于：2005-03-29 10:08
Table 10 shows the outputs for Toggle Bit I on DQ6.
Figure 6 shows the toggle bit algorithm in flowchart form, and the section :D :D :mad: :o |
|
|
2743楼#
发布于：2005-03-29 10:08
The system
must provide the program address to read valid status information on DQ7. ;) :cool: :cool: |
|
|
2744楼#
发布于：2005-03-29 10:09
Erase Suspend. When the
Embedded Program algorithm is complete, the device outputs the datum programmed to DQ7. :mad: :mad: ;) |
|
|
2745楼#
发布于：2005-03-29 10:09
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) ;) ;) :( |
|
|
2746楼#
发布于：2005-03-29 10:09
The system
must provide the program address to read valid status information on DQ7. ;) :cool: |
|
|
2747楼#
发布于：2005-03-29 10:09
The system
must provide the program address to read valid status information on DQ7. ;) ;) ;) :cool: ;) :( |
|
|
2748楼#
发布于：2005-03-29 10:09
The system
must provide the program address to read valid status information on DQ7. :D :mad: :D :mad: |
|
|
2749楼#
发布于：2005-03-29 10:09
After an erase command sequence is written, if all
sectors selected for erasing are protected, :o :cool: :D :D :o :o |
|
|
2750楼#
发布于：2005-03-29 10:10
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) ;) ;) :( :D :) :) :) ;) :D |
|
|
2751楼#
发布于：2005-03-29 10:10
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, |
|
|
2752楼#
发布于：2005-03-29 10:10
Table 10 shows the outputs for Toggle Bit I on DQ6.
Figure 6 shows the toggle bit algorithm in flowchart form, and the section :D :mad: :cool: :P |
|
|
2753楼#
发布于：2005-03-29 10:11
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :mad: :mad: :mad: :D :mad: :mad: ;) :mad: |
|
|
2754楼#
发布于：2005-03-29 10:11
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) ;) ;) :( :D :) :) :) ;) |
|
|
2755楼#
发布于：2005-03-29 10:11
The system
must provide the program address to read valid status information on DQ7. ;) :cool: :cool: :cool: :o ;) |
|
|
2756楼#
发布于：2005-03-29 10:11
The system
must provide the program address to read valid status information on DQ7. :D :mad: |
|
|
2757楼#
发布于：2005-03-29 10:12
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2758楼#
发布于：2005-03-29 10:12
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :o :o :mad: :o :D :mad: ;) :mad: |
|
|
2759楼#
发布于：2005-03-29 10:12
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) ;) ;) :( :D :) :) :) |
|