|
2760楼#
发布于：2005-03-29 10:12
After an erase command sequence is written, if all
sectors selected for erasing are protected, :o :cool: :D :D |
|
|
2761楼#
发布于：2005-03-29 10:12
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :mad: :mad: :mad: :D :mad: |
|
|
2762楼#
发布于：2005-03-29 10:12
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) ;) ;) :( :D :) |
|
|
2763楼#
发布于：2005-03-29 10:13
After an erase command sequence is written, if all
sectors selected for erasing are protected, :) :) :mad: :D :mad: :( ;) :mad: |
|
|
2764楼#
发布于：2005-03-29 10:13
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2765楼#
发布于：2005-03-29 10:13
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :cool: :o :P :o :o |
|
|
2766楼#
发布于：2005-03-29 10:14
After an erase command sequence is written, if all
sectors selected for erasing are protected, :) :) :mad: :D :mad: :( ;) |
|
|
2767楼#
发布于：2005-03-29 10:14
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. ;) ;) :mad: :o :D |
|
|
2768楼#
发布于：2005-03-29 10:15
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :cool: :o |
|
|
2769楼#
发布于：2005-03-29 10:15
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) ;) |
|
|
2770楼#
发布于：2005-03-29 10:15
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :D :D :o |
|
|
2771楼#
发布于：2005-03-29 10:15
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2772楼#
发布于：2005-03-29 10:15
Table 10 shows the outputs for Toggle Bit I on DQ6.
Figure 6 shows the toggle bit algorithm in flowchart form, and the section |
|
|
2773楼#
发布于：2005-03-29 10:16
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, ;) ;) ;) :( :D :) :) |
|
|
2774楼#
发布于：2005-03-29 10:16
When the system detects DQ7 has changed from the
complement to true data, it can read valid data at DQ7 |
|
|
2775楼#
发布于：2005-03-29 10:16
When the Embedded Erase
algorithm is complete, or if the device enters the Erase Suspend mode, :o :o :mad: |
|
|
2776楼#
发布于：2005-03-29 10:16
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. ;) ;) |
|
|
2777楼#
发布于：2005-03-29 10:16
a valid address is an address within any
sector selected for erasure. During chip erase, a valid address is any non-protected sector address. :cool: :o :P :o |
|
|
2778楼#
发布于：2005-03-29 10:17
The system
must provide the program address to read valid status information on DQ7. :D :mad: :D :mad: :mad: :mad: |
|
|
2779楼#
发布于：2005-03-29 10:17
Table 10 shows the outputs for Toggle Bit I on DQ6.
Figure 6 shows the toggle bit algorithm in flowchart form, and the section :P :o :P :o |
|