请教 windriver 的问题

pci9052 board,用windriver5.03开发的驱动，98下正常，2000 下报 failed locking device。是否与安装有关。inf 文件见下
高分回报



; INF file for PCI card
; Generated by jungo.

; Copyright jungo Co. 2002

[Version]
Signature=\"$Chicago$\"
Provider=%Provider%

Class=Jungo
ClassGUID={c671678c-82c1-43f3-d700-0049433e9a4b}

DriverVer=10/01/2002,1.0.0.0

[SourceDisksNames]
1=\"Easy 2000P Installation Disk\",,0

[SourceDisksFiles]
wdpnp.sys = 1

[ClassInstall32]
Addreg=JungoClassReg

[JungoClassReg]
HKR,,,,Jungo
HKR,,Icon,,-5
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,wdpnp.sys

[DestinationDirs]
DefaultDestDir=10,System32\\Drivers

[Manufacturer]
%Manufacturer%=mfgsec

[mfgsec]
; The Vendor ID is 10b8, and the Device ID is 9050
%EASY2000P%=EASY2000P, PCI\\VEN_10b8&DEV_9050

[EASY2000P]
Log_Config=Base1
Copyfiles = EASY2000P.Files.Ext

[Base1]
IRQConfig=3,4,5,7,9,10,11,14,15


[EASY2000P.Services]
Addservice = wdpnp, 0x00000002, EASY2000P.Addservice

[EASY2000P.AddService]
DisplayName    = %usb.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\\System32\\Drivers\\wdpnp.sys


[EASY2000P.Files.Ext]
;Remove the remarks for installation on a target computer
;windrvr.sys
wdpnp.sys

[ControlFlags]

[Strings]
Provider=\"jungo.\"
Manufacturer=\"jungo.\"
usb.SvcDesc=\"WinDriver PNP Client\"
EASY2000P=\"jungo : Chromatograph Data Sample\"

没仔细看这个inf，不过如果是windriver生成的inf，就应该没有问题，出现failed locking device大多是windriver里的初始化函数用的不对，再检查一下参数看看。