Info安装驱动问题！！！分数不是问题

前些日子驱动程序的工作大致告一段落。可我在写驱动安装Info文件
时却发现，我写的info在Win98下可以正常安装，但是在Win2000下就
无法拷贝文件到相应的目录下了。我都把书看了好几遍了info里的东
东都知道检查自己的info也觉得没问题可是不知道为什么老是驱动
拷贝不上。:(

info内容:
-----------------------------------------------------------
[Version]
Signature   = $CHICAGO$
Provider    = %PLX%
Class       = Unknown
DriverVer   = 01/15/2002, 3.40.0.0

[Manufacturer]
%PLX% = PLX.Mfg

[PLX.Mfg]
\"PCI 9054 RDK-LITE Board\"   = DDInstall_9054, PCI\\VEN_10b5&DEV_5406


[CopyFiles_ApiDll]
PlxApi.dll,,,4

[CopyFiles_9054]
Pci9054.sys,,,4

;------------------------------------------------------------------
;Windows 2000 installation section
;------------------------------------------------------------------
[DDInstall_9054.NT]
AddReg    = AddRegistry_NT_9054
CopyFiles = CopyFiles_ApiDll, CopyFiles_9054

[DDInstall_9054.NT.Services]
AddService = Pci9054, 0x00000002, Service_Inst_9054, EventLog_Inst_9054

[AddRegistry_NT_9054]
HKLM,System\\CurrentControlSet\\Services\\Pci9054,CommonBufferSize,0x00010003,0x10000
HKLM,System\\CurrentControlSet\\Services\\Pci9054,MaxSglTransferSize,0x00010003,0x100000

[Service_Inst_9054]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 0                  ; SERVICE_ERROR_IGNORE
ServiceBinary  = %10%\\System32\\Drivers\\Pci9054.sys

;------------------------------------------------------------------
; Windows 98 installation section
;------------------------------------------------------------------
[DDInstall_9054]
AddReg    = AddRegistry_9054
CopyFiles = CopyFiles_ApiDll, CopyFiles_9054

[AddRegistry_9054]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,Pci9054.sys
HKR,,ErrorLogLevel,0x00010003,2
HKR,,CommonBufferSize,0x00010003,0x10000
HKR,,MaxSglTransferSize,0x00010003,0x100000

;-----------------------------------------------------------
; Event log registry entries
;-----------------------------------------------------------
[EventLog_Inst_9054]
AddReg = EventLog_AddReg_9054

[EventLog_AddReg_9054]
HKR,,EventMessageFile,0x00020000,\"%SystemRoot%\\System32\\IoLogMsg.dll;%SystemRoot%\\System32\\Drivers\\Pci9054.sys\"
HKR,,TypesSupported,0x00010001,7

;-----------------------------------------------------------
; Source file information
;-----------------------------------------------------------
[SourceDisksNames.x86]
1 = %InstallDisk%

[SourceDisksFiles]
PlxApi.dll  = 1
Pci9054.sys = 1

[DestinationDirs]
CopyFiles_ApiDll = 11
DefaultDestDir   = 10, System32\\Drivers

;-----------------------------------------------------------
; String information
;-----------------------------------------------------------

[Strings]
InstallDisk = \"PLX Installation Disk\"
PLX         = \"PLX Technology, Inc.\"

大家新年好，可我现在还是有问题请大家帮帮忙啊！
阿弥陀佛！阿弥陀佛！阿弥陀佛！

DefaultDestDir = 12
就可以
这个在win2000下比较特殊，有时后面那个system32/drivers不管用

谢谢帮助！阿弥陀佛！

其实有个简单方法，就是用DriverStudio作一个驱动，直接用它的inf文件就可以了，就是注意一下设备标识符