win ce 系统无法启动，求助。

No ARP response in 2 seconds, assuming ownership of 192.168.1.201
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Locked Down Link 1
Src IP 192.168.1.201 Port 0800   Dest IP 192.168.1.108 Port 08C2
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp
Found pTOC signature.
ROMHDR at Address 00200044h
RomHdr.ulRAMStart=82000000h RomHdr.physfirst=80200000h.
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
EBOOT: pCfgData = 0x5F16A, pCfgData->Flags
INFO: Jumping to image at 0x00201006...
Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00
ProcessorType=0920  Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80201150
InitClock...
Processor = 199Mhz, Bus = 99Mhz
Sp=ffffc7cc
Data Abort: Thread=83efc000 Proc=82026110 'gwes.exe'
AKY=00000009 PC=0004be4c(gwes.exe+0x0003be4c) RA=00052d7c(gwes.exe+0x00042d7c) B
VA=08000008 FSR=00000007
我用pb5,0新建了一个工程，用的是ep9312，
运行到此就停止了，为啥呢？

你的某一个驱动有问题

gwe死了,一般是显示驱动有问题,或者你的NK中根本没有显示驱动.

看一些给display分配的内存地址和驱动里面使用的内存地址是否一致。

显示缓存分配的少了