SIEMENS RIL驱动调试

不知道外面有没有人做过SIEMENS RIL驱动调试,
  按照WM上注册表设置:

RIL驱动注册表设置:

 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
   "Dll"="rilgsm.dll"
   "Prefix"="RIL"
   "Order"=dword:3
   "Index"=dword:1

[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
  "BaudRate"=dword:1C200
  "ComPort"="VCA2:"
  "DataPort"="VDA1:"
  "DataPortInternal"="VCA1:"
  "AuxComPort"="VCA3:"
  "AuxDataPort"="VDA2:"
  "AuxDataPortInternal"="VCA4:"
  "EonsEnable"=dword:1

多路复用注册表设置:
; Multiplexer driver
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Multiplexer]
  "Prefix"="MPX"
  "Dll"="multiplx.dll"
  "Index"=dword:1
  "Order"=dword:2
  "Start"=dword:0
  "BaudRate"=dword:1C200
  "ParentPort"="COM2:"
  "FriendlyName"="GSM27_10 Multiplexer"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\VirtCom1]
  "Prefix"="VCA"
  "Dll"="multiplx.dll"
  "Index"=dword:1
  "Order"=dword:3
  "DLCI"=dword:1
  "FriendlyName"="Data Virtual COM Port"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\VirtCom2]
  "Prefix"="VCA"
  "Dll"="multiplx.dll"
  "Index"=dword:2
  "Order"=dword:3
  "DLCI"=dword:2
  "FriendlyName"="AT Cmd Virtual COM Port"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\VirtCom3]
  "Prefix"="VCA"
  "Dll"="multiplx.dll"
  "Index"=dword:3
  "Order"=dword:3
  "DLCI"=dword:3
  "FriendlyName"="Aux AT Cmd Virtual COM Port"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\VirtCom4]
  "Prefix"="VDA"
  "Dll"="rilgsm.dll"
  "Index"=dword:1
  "Order"=dword:3
  "FriendlyName"="Application Data Virtual COM Port"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\VirtCom5]
  "Prefix"="VCA"
  "Dll"="multiplx.dll"
  "Index"=dword:4
  "Order"=dword:3
  "DLCI"=dword:4
  "FriendlyName"="Aux Data Virtual COM Port"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\VirtCom6]
  "Prefix"="VDA"
  "Dll"="rilgsm.dll"
  "Index"=dword:2
  "Order"=dword:3
  "FriendlyName"="Application Aux Data Virtual COM Port"

本身WM下带有不带SOURCE CODE的multiplx.dll,按照其设置,他应该会打开  "ParentPort"="COM2:", 也就是COM2进行通讯,但是实际上在TRACE中去跟,并没有发现COM2被打开!不知道外面有没有人调试过,可能会是什么原因!

     确定COM2是可以被打开的,注册表和系统有支持,并用应用程序测试过,能通过此COM口发送AT命令和接收到返回信息!