CE6.0 NK启动问题 FirstSchedule

启动时打印的消息如下：
Jonathan Windows CE Kernel for MIPS Built on Apr 22 2010 at 20:27:37
+OEMInit
RMI Alchemy Au1300/DbAu13xx

Cold Boot
+OEMInterruptInit
+OEMInterruptInit Disable All...
+OEMInterruptInit Parsing Platform GPINT Configuration table...
DONE
-OEMInterruptInit
Using RTCTICK tick source
BootArgs are at A00FFC00, SIG = 4dc6dfdf
BOOTARG Sig is bad
Au13xx AA (PRId 800C8001) @ 792MHZ
-OEMInit
+enlideoyjnta 000-1
Paging in from uncompressed R/O page from XIP module -- should've never happened
Booting Windows CE version 6.00 for (MIPS32) jonathan 2010-04-21
MIPS16 Instructions NOT Supported jonathan 2010-04-21
&pTOC = 00000000, pTOC = 02a5ffb4, pTOC->ulRamFree = .8lx,                         MemForPT = 00000000 jonathan 2010-04-21

Old or invalid version stamp in kernel structures - starting clean! jonathan 2010-04-21
Configuring: Primary pages: 15071, Secondary pages: 0, Filesystem pages = 32 jonathan 2010-04-21

Booting kernel with clean memory configuration: jonathan 2010-04-21
Memory Sections:
[0] : start: 86319000, extension: 00008000, length: 03adf000 jonathan 2010-04-21
-enlideoyjnta 000-1
[0] : start: 00000000, extension: 02a5ffb4, length: 00920660 jonathan 2010-04-21
+KernelInit jonathan 2010-04-21
+APICallInit jonathan 2010-04-21
-APICallInit jonathan 2010-04-21
+HeapInit jonathan 2010-4-21
-HeapInit: SmallestSize = 0000 jonathan 2010-4-21
+InitMemoryPool jonathan 2010-4-21
InitMemoryPool done, free=0 jonathan 2010-4-21
+PROCInit jonathan 2010-04-21
-RCntjnta 000-1
NK.EXE+VMInit jonahtan 2010-04-21
-VMInit fRet=TRUE jonahtan 2010-04-21
+THRDInit jonathan 2010-04-21
+OpenExecutable: NK.EXE
OpenExecutable: plain name = NK.EXE
OpenExecutable: Filesys not loaded, Opening from ROM
+OpenFileFromROM: trying 'NK.EXE'
-OpenExecutable 'NK.EXE' returns 00000000
--Scheduler: Created master thread 89dff028 jonathan 2010-04-21
Initializing Memory Mapped File Support jonathan 2010-04-21
--Mapped File Support jonathan 2010-04-21
-KernelInit jonathan 2010-04-21

显示KernelInit已经运行完毕，接下来应该是由FirstSchedule调度THRDinit()函数创建线程，其回调函数是SystemStartup，但是该函数没有起来，
到这里就运行不下去了，不知道是不是时钟没有配对还是其他什么原因？烦请高手赐教！

牛人指教啊，怎么搞都不行，SystemStartup就是没有起来

是在KernelInit之后就起不来了？
你们最后的解决方法就是把内存配置改了下？
我现在应该可以排除时钟的问题