为什么我的驱动一安装就死机？

我用DriverWork做了一个9052的驱动程序 硬件向导提示找到新硬件后我指定了inf文件 点确定后就死机，只能重启。试了好多次， 每次都是这样。我都块疯了，请各位高手救救我吧！
下面是我的inf文件
;; PCI9052.inf

;; *********  PLEASE READ ***********
;; The wizard cannot create exact INF files for all buses and device types.
;; You may have to make changes to this file in order to get your device to
;; install. In particular, hardware IDs and logical configurations require
;; intervention.
;;
;; The Windows DDK documentation contains an excellent INF reference.

;--------- Version Section ---------------------------------------------------

[Version]
Signature=\"$CHICAGO$\"

; If device fits one of the standard classes, use the name and GUID here,
; otherwise create your own device class and GUID as this example shows.
Class=DAQDevice
ClassGUID={82fd06e6-87f9-477d-8149-0a7da9d0ff5f}
Provider=%ProviderName%


;--------- SourceDiskNames and SourceDiskFiles Section -----------------------

; These sections identify source disks and files for installation.  They are
; shown here as an example, but commented out.

;[SourceDisksNames]
;1 = \"Install Disk\",Disk1,,

;[SourceDisksFiles]
;PCI9052.sys = 1,,

;--------- ClassInstall/ClassInstall32 Section -------------------------------

; Not necessary if using a standard class

; 9X Style
[ClassInstall]
Addreg=Class_AddReg

; NT Style
[ClassInstall32]
Addreg=Class_AddReg

[Class_AddReg]
HKR,,,,%DeviceClassName%
HKR,,Icon,,\"-18\"

;--------- DestinationDirs Section -------------------------------------------

[DestinationDirs]
PCI9052_Files_Driver = 10,System32\\Drivers

;--------- Manufacturer and Models Sections ----------------------------------

[Manufacturer]
%MfgName%=Mfg0

[Mfg0]

; PCI hardware IDs use the form
;   PCI\\VEN_aaaa&DEV_bbbb&SUBSYS_cccccccc&REV_dd
;
%DeviceDesc%=PCI9052_DDI, PCI\\VEN_10B5&DEV_9050&SUBSYS_905010B5&REV_02

;---------- DDInstall Sections -----------------------------------------------
; --------- Windows 9X -----------------

; Experimentation has shown that DDInstall root names greater than 19 characters
; cause problems in Windows 98

[PCI9052_DDI]
CopyFiles=PCI9052_Files_Driver
AddReg=PCI9052_9X_AddReg

[PCI9052_9X_AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,PCI9052.sys
HKR, \"Parameters\", \"BreakOnEntry\", 0x00010001, 0
; --------- Windows NT -----------------

[PCI9052_DDI.NT]
CopyFiles=PCI9052_Files_Driver
AddReg=PCI9052_NT_AddReg

[PCI9052_DDI.NT.Services]
Addservice = PCI9052, 0x00000002, PCI9052_AddService

[GPIB_NT_AddReg]
HKLM, \"System\\CurrentControlSet\\Services\\PCI9052\\Parameters\",\\
\"BreakOnEntry\", 0x00010001, 0

[PCI9052_AddService]
DisplayName    = %SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\\System32\\Drivers\\PCI9052.sys



; --------- Files (common) -------------

[PCI9052_Files_Driver]
PCI9052.sys

;--------- Strings Section ---------------------------------------------------

[Strings]
ProviderName=\"Your Company Name here\"
MfgName=\"Name of HW Manufacturer here\"
DeviceDesc=\"Description of Device here\"
DeviceClassName=\"Description of Test Device class here\"
SvcDesc=\"Description of Test NT service here\"

多办是你驱动有问题
你调试一下应该很容易确定问题

可是我一安装就死机了，改怎么调试啊。另外inf文件里面的ClassGUID和驱动文件里的GUID有什么关系吗？ 每次我用向导生成
的驱动的GUID都是一样的。我该了inf里的ClassGUID 这有影响吗？

我也一样啊,请各位大侠们拉小弟们一把吧!

我也正在苦恼中
我的驱动程序也是安装时死机,而且时直接重起,用SoftICE都抓不到.
郁闷的是在大部分机器上运行良好.少数XP系统上就是怎么也装不起.

解决了就分享一下经验啊

PCI9052好像不支持XP系统