在用DRIVER MONITOR观察驱动所产生的错误信息

当已开发好的USB硬件插入时，我用DriverStudio生成的USB驱动，可以安装上去，但设备管理器中显示有问题，不能启用。用DRIVER MONITOR观察产生的错误信息如下
monitor Using existing service database entry for driver.
monitor Select File | Start Driver to start the driver.
monitor ERROR (1058): The driver is marked as disabled (Start=4) in its service database entry.
1299.817803  Default N9603: In DriverEntry
1299.817925  Default N9603: m_bBreakOnEntry loaded from registry, resulting value: [0x00000000]
  monitor -- end --

此时设备已经拔掉，和这个有关吗？:confused::confused::confused:

似乎service里面有问题，查inf

斑竹好
我把INF中有关加载注册表信息列出如下
[N9603_DDI.NT]
CopyFiles=N9603_Files_Driver
AddReg=N9603_NT_AddReg

[N9603_DDI.NT.Services]
Addservice = N9603, 0x00000002, N9603_AddService

[N9603_AddService]
DisplayName    = %SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%\System32\Drivers\N9603.sys

[N9603_NT_AddReg]
HKLM, "System\CurrentControlSet\Services\N9603\Parameters",\
"BreakOnEntry", 0x00010001, 0


可为什么注册表中的BreakOnEntry值是0x00000000

上面说的starttype和你inf里面的不一样。看看怎么回事