wince5.0中如何建立ActiveSync连接？

我用的是2442，wince5.0，利用USB建立PC端与设备之间的连接，PC机端用的是微软ActiveSync4.1.0(Build 4841)，ce5.0系统起来后，ActiveSync始终都连不上，features中我已经选择了ActiveSync，不知道这个问题如何解决，需要修改platform.reg吗？如何修改呢？
现在的注册表是这样的：
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
   "DefaultClientDriver"=- ; erase previous default
   "DefaultClientDriver"="Serial_Class"

[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Serial_Class]
   "FriendlyName"= LOC_USBFN_SERIAL_NAME
   "idVendor"=dword:0547
   "Manufacturer"=LOC_USBFN_SERIAL_MANUFACTURER
   "idProduct"=dword:2720
   "Product"=LOC_USBFN_SERIAL_PRODUCT
   "Index"=dword:5

[HKEY_CURRENT_USER\ControlPanel\Comm]
   "Cnct"="`USB"

多谢大家了！

参照串口驱动的注册表给[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Serial_Class]
设一个UNIMODEM的注册表项,系统启动以后创建一个基于USB 串口的直连的拨号连接,就可以用这个连接与PC同步了.

斑竹，能否再具体的说一下，多谢了～～～

能不能给出详细的操作过程？

组建选齐了，还需要选择usb function->serial

我在platform.reg里加了
[[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Serial_Class]
   "FriendlyName"="PXA270 USB Cable:"
   "Index"=dword:9
   "Order"=dword:2
   "DevConfig"=hex: 10,00,00,00,05,00,00,00,00,01,00,00,00,4B,00,00,00,00,08,00,00,00,00,00,00
这一段是从别的ＢＳＰ里ＣＯＰＹ过来的，然后在ＣＥ端选择“PXA270 USB Cable"的连接，可以连通了，但是只是看文件，用ＴＯＯＬＳ里的工具还是连不通，斑竹能否讲讲其中的原理。。。谢谢了！！！

http://blogs.msdn.com/ce_base/archive/2007/04/02/using-platform-builder-remote-tools-over-activesync.aspx

同问啊,我的activesync 可以查看文件,可以拷贝文件,但是远程工具没有一个可以连上的...

Here's how to do it!  I'll use Kernel Tracker in my steps here for setting up the connection but all tools will work after you do this.

Install Platform Builder
Open Remote Kernel Tracker from the Tools or Target menu (depends on which version of Platform Builder you're using)
Cancel the "Select a Windows CE Device" dialog
Go to Connection | Configure Windows CE Platform Manager...
Select "Windows CE Default Platform" and click the "Add Device" button.  Name the new device "ActiveSync Device."
Select the new device and click the "Properties..." button.
Set the Transport and Startup Server to ActiveSync.

Hit OK and close the Platform Manager Configuration window.
Connect your device to ActiveSync.
In Kernel Tracker, go to Connection | Connect to Device.  This time when it asks you what device to connect to, the ActiveSync Device will show up.


Select the ActiveSync Device and click OK.  Kernel Tracker will connect to your device!

 

图片：activesync_error.JPG

Now, before you go spend a lot of time on it, I need to warn you:  I think there is a bug in Platform Builder 6.0 that makes this method not connect to Windows Mobile devices reliably.  It's still worth a try, but if it doesn't connect, then you might need to wait for some upcoming updates.  (No, I can't promise when those will be available.)

UPDATE June 6, 2007:  The "updates" I was talking about were the Platform Builder 6 Service Pack 1, which is now available online.  (http://www.microsoft.com/downloads/details.aspx?FamilyId=BF0DC0E3-8575-4860-A8E3-290ADF242678&displaylang=en)  At the time I wrote this post I was helping someone with a Remote Call Profiler problem which seemed to be fixed by SP1.  It was Call Profiler specific however.  If your remote tools still won't connect, it may take some troubleshooting; I'll try to get a new post out about that soon.  Often it is a mismatch between the CPU/architecture reported by your BSP and what the tools are looking for.  Sometimes it's an install error where the necessary files are missing from your PC.

请问2442的板子在哪里买到的~~?

这个问题可能是因为冲突引起。
是不是同时安装了4.2、5.0或EVC、VS2005等等。。。。
试试卸载activesync。删除安装的目录，重新安装最新的activesync 4.5再试试

我改变设置试了试,那个Remote file viewer 和Remote Regeditor 都可以用Activesync 连通,但是CETK在连得时候,我注意到PC向Device 拷贝文件的的动作瞬间就结束了..其实文件根本没有拷贝进去..所以后面在试图执行Device端clientside.exe的时候肯定出错的...
我这个板子上也又网口,可以用网口跑cetk,但是通过activesync 总是会出现这样的问题..

我的pc端只装了vs2005 和 activesync 4.5,其他版本pb和evc 都没有装..

問題已經解決,做6.0且是arm的朋友,參考這個
http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/a7af4d568659bc3b/8d117876157dc7e5?lnk=gst&q=activesync+remote+6.0#8d117876157dc7e5

不知道這算不算CE6.0的bug?