|
阅读：1382回复：3
怎么让ne2000支持rtl8139网卡?
在做eboot的时候,老是无法初始化网卡, 我看到有人说是rtl8139不是ne2000的兼容网卡, 那我该怎么办才能它支持rtl8139呢?
错误信息是: +EDBG:NE2000Init EDBG:NE2000Init using I/O range at 0x0000F800 EDBG:NE2000Init:HWInit failed to read cmd reg -EDBG:NE2000Init vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv --------------------------------------------- Failed to initialize Ethernet board! Please check that the Ethernet card is properly installed and configured. |
|
|
沙发#
发布于：2007-11-26 20:32
找个8139的SPEC,把当应的函数重新实现一下
|
|
|
|
板凳#
发布于：2007-11-27 09:42
大哥,还是搞不懂怎么改, 能否再给点小提示?
|
|
|
地板#
发布于：2007-11-27 10:26
上面的问题已经解决,只要将ne2000改为rtl8139就好,但是现在还出现另外一个问题,就是无论我分配什么IP地址, 都提示已经有其他人在使用这个IP,错误如下:
Duplicate IP Address Detected: -IP address 192.168.16.201 in use by device with MAC address 00:08:EE:00:AA:C9. -Requesting new IP address via DHCP... Some other station has IP Address: 192.168.16.201 !!! Aborting. 这是咋回事啊, 请各位大哥帮帮忙. |
|