[紧急]请帮忙看看inf文件问题

就ddk中的一个例子，然后我改了下。
原来的inf文件也不行，也改了一下。
可就是怎么改都有问题，请大虾们帮帮忙啊！
我在网上找了好久都没有相关的主题有解决问题的。

问题描述：
用DriverStudio带的EzDriverInstall安装后：
Unknown Error: 0xe0000219

用“添加硬件向导”后：
安装设备时出现了一个错误。
由于没有为设备范例指定函数驱动程序，安装没有成功。

相关inf贴到二楼吧

[version]
Signature   = "$Windows NT$"
Class       = NetTrans
ClassGUID   = {2A5B30B9-036E-4377-B260-70CC2D6D72C1}
Provider    = %Msft%
DriverVer   = 05/16/2011,5.00.2064

;-------------------------------------------------------------------------
; Service installation support
;-------------------------------------------------------------------------

[Manufacturer]
%Msft%=MSFT,NTx86

[MSFT]
%PACKET_Desc%=Install, MS_PACKET ;;;;;;;;;;;;;;;;;;;;;;
[MSFT.NTx86]
%PACKET_Desc%=Install, MS_PACKET ;;;;;;;;;;;;;;;;;;;;;;

;-----
[Install]
AddReg=Inst_Ndi
Characteristics=0 ; Has no characterstic
CopyFiles=CpyFiles_Sys
CopyInf= packet.inf

;---- SourceDiskNames and SourceDiskFiles Section -----------------------

; These sections identify source disks and files for installation. They are
; shown here as an example, but commented out.

[SourceDisksNames]
1 = "C:\ndis\driver",Disk1,,

[SourceDisksFiles]
packet.sys = 1,objchk\i386,

;-------------------------------------------------------------------------
; Declare Destination Directories for file copy/deletion
;-------------------------------------------------------------------------
[DestinationDirs]
CpyFiles_Sys    = 12    ; DIRID_DRIVERS
;-------------------------------------------------------------------------
; Installation Section
;-------------------------------------------------------------------------

;-------------------------------------------------------------------------
; Files to Copy/Delete - Referenced by Install and Remove sections above
;-------------------------------------------------------------------------
[CpyFiles_Sys]
packet.sys,,,2

;-------------------------------------------------------------------------
; Ndi installation support
;-------------------------------------------------------------------------
[Inst_Ndi]
HKR,Ndi,Service,,"Packet"
HKR,Ndi,HelpText,,%PACKET_HelpText%
HKR,Ndi\Interfaces, UpperRange,, noupper
HKR,"Ndi\Interfaces","LowerRange",,"ndis5,ndis4"

[Install.Services]
AddService=Packet,,PACKET_Service_Inst

[Packet_Service_Inst]
DisplayName     = %PACKET_Desc%
ServiceType     = 1 ;SERVICE_KERNEL_DRIVER
StartType       = 3 ;SERVICE_AUTO_START
ErrorControl    = 1 ;SERVICE_ERROR_NORMAL
ServiceBinary   = %10%\System32\Drivers\packet.sys
LoadOrderGroup  = "PNP_TDI"
AddReg          = AddReg_PACKET_Service_Inst
Description     = %PACKET_Desc%


[AddReg_PACKET_Service_Inst]
HKLM,"System\CurrentControlSet\Services\Packet","TextModeFlags",%REG_DWORD%,0x0001
HKR,"Parameters","Test",,"Hello"

;-------------------------------------------------------------------------
; Support for removal of static registry settings
;-------------------------------------------------------------------------
[Install.Remove]
DelReg=Del_Static_Reg,packet.sys

[Install.Remove.Services]
DelService=Packet

[Del_Static_Reg]
HKLM,"System\CurrentControlSet\Services\Packet","TextModeFlags"

[Strings]
Msft = "Microsoft"
PACKET_Desc = "DDK PACKET Protocol"
PACKET_HelpText = "A non-routable protocol designed for use in small LANs."
REG_DWORD = 0x10001

同问，我也是修改了名字。就加载不了驱动了。
手动添加后又出现不能执行的问题。不知道netsf.inf文件如何修改啊

同问，我也是修改了名字。就加载不了驱动了。
手动添加后又出现不能执行的问题。不知道netsf.inf文件如何修改啊

呵呵，同求高手解答

你的驱动inf是自己写的吗？

引用第5楼xinriyue于2011-05-19 09:47发表的 回 2楼(台灯下的光) 的帖子 :
你的驱动inf是自己写的吗？

自己改的，但不知哪改错了

照着《驱动开发详解》的inf改了下，能装上，但还是加载不了？