znsoft
管理员
管理员
  • 注册日期2001-03-23
  • 最后登录2018-12-14
  • 粉丝104
  • 关注6
  • 积分915分
  • 威望14496点
  • 贡献值7点
  • 好评度2410点
  • 原创分5分
  • 专家分100分
  • 社区居民
  • 最爱沙发
  • 社区明星
阅读:1174回复:0

手动让系统蓝屏并生成dump文件

楼主#
更多 发布于:2014-05-27 09:09

Forcing a System Crash from the Keyboard

 53 out of 65 rated this helpful - Rate this topic  






Most of the following keyboards can cause a system crash directly:

 PS/2 keyboards connected on i8042prt ports
This feature is available in Windows 2000 and later versions of Windows operating system.
 USB keyboards
This feature is available in:

•Windows Server 2003 Service Pack 1 if the hotfix available with KB 244139 is installed.


•Windows Server 2003 (with Service Pack 2 or later).


•Windows Vista Service Pack 1 if the hotfix available with KB 971284 is installed.


•Windows Vista Service Pack 2.

•Windows Server 2008 Service Pack 1 if the hotfix available with KB 971284 is installed.
•Windows Server 2008 (with Service Pack 2 or later).
•Windows 7 and later versions of Windows operating system.

Note  This feature is not available in Windows XP.

You must ensure the following three settings before the keyboard can cause a system crash:

1.If you wish a crash dump file to be written, you must enable such dump files, choose the path and file name, and select the size of the dump file. For more information, see Enabling a Kernel-Mode Dump File.


2.With PS/2 keyboards, you must enable the keyboard-initiated crash in the registry. In the registry key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\i8042prt\Parameters, create a value named CrashOnCtrlScroll, and set it equal to a REG_DWORD value of 0x01.


3.With USB keyboards, you must enable the keyboard-initiated crash in the registry. In the registry key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\kbdhid\Parameters, create a value named CrashOnCtrlScroll, and set it equal to a REG_DWORD value of 0x01.


You must restart the system for these settings to take effect.

After this is completed, the keyboard crash can be initiated by using the following hotkey sequence: Hold down the rightmost CTRL key, and press the SCROLL LOCK key twice.

The system then calls KeBugCheck and issues bug check 0xE2 (MANUALLY_INITIATED_CRASH). Unless crash dumps have been disabled, a crash dump file is written at this point.

If a kernel debugger is attached to the crashed machine, the machine will break into the kernel debugger after the crash dump file has been written.

For more information on using this feature, refer to the article Generate a memory dump file by using the keyboard (KB 244139).

Defining Alternate Keyboard Shortcuts to Force a System Crash from the Keyboard

You can configure values under the following registry subkeys for different keyboard shortcut sequences to generate the memory dump file:

•For PS/2 keyboards:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\i8042prt\crashdump


•For USB keyboards:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kbdhid\crashdump


You must create the following registry REG_DWORD values under these subkeys:

Dump1Keys
The Dump1Keys registry value is a bit map of the first hot key to use. For example, instead of using the rightmost CTRL key to initiate the hot key sequence, you can set the first hot key to be the leftmost SHIFT key.

The values for the first hot key are described in the following table.


Value

First key used in the keyboard shortcut sequence


0x01
 
Rightmost SHIFT key
 

0x02
 
Rightmost CTRL key
 

0x04
 
Rightmost ALT key
 

0x10
 
Leftmost SHIFT key
 

0x20
 
Leftmost CTRL key
 

0x40
 
Leftmost ALT key
 

 

Note  You can assign Dump1Keys a value that enables one or more keys as the first key used in the keyboard shortcut sequence. For example, assign Dump1Keys a value of 0x11 to define both the rightmost and leftmost SHIFT keys as the first key in the keyboard shortcut sequence.
Dump2Key
The Dump2Key registry value is the index into the scancode table for the keyboard layout of the target computer. The following is the actual table in the driver.







Copy



const UCHAR keyToScanTbl[134] = {
        0x00,0x29,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,
        0x0A,0x0B,0x0C,0x0D,0x7D,0x0E,0x0F,0x10,0x11,0x12,
        0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x00,
        0x3A,0x1E,0x1F,0x20,0x21,0x22,0x23,0x24,0x25,0x26,
        0x27,0x28,0x2B,0x1C,0x2A,0x00,0x2C,0x2D,0x2E,0x2F,
        0x30,0x31,0x32,0x33,0x34,0x35,0x73,0x36,0x1D,0x00,
        0x38,0x39,0xB8,0x00,0x9D,0x00,0x00,0x00,0x00,0x00,
        0x00,0x00,0x00,0x00,0x00,0xD2,0xD3,0x00,0x00,0xCB,
        0xC7,0xCF,0x00,0xC8,0xD0,0xC9,0xD1,0x00,0x00,0xCD,
        0x45,0x47,0x4B,0x4F,0x00,0xB5,0x48,0x4C,0x50,0x52,
        0x37,0x49,0x4D,0x51,0x53,0x4A,0x4E,0x00,0x9C,0x00,
        0x01,0x00,0x3B,0x3C,0x3D,0x3E,0x3F,0x40,0x41,0x42,
        0x43,0x44,0x57,0x58,0x00,0x46,0x00,0x00,0x00,0x00,
        0x00,0x7B,0x79,0x70 };



Note   Index 124 (sysreq) is a special case because an 84-key keyboard has a different scan code.

If you define alternate keyboard shortcuts to force a system crash from a USB or PS/2 keyboard, you must either set the CrashOnCtrlScroll registry value to 0 or remove it from the registry.

Limitations

It is possible for a system to freeze in such a way that the keyboard shortcut sequence will not work. However, this should be a very rare occurrence. Using the keyboard shortcut sequence to initiate a crash will work even in many instances where CTRL+ALT+DELETE does not work.

Forcing a system crash from the keyboard does not work if the computer stops responding at a high interrupt request level (IRQL). This limitation exists because the Kbdhid.sys driver, which allows the memory dump process to run, operates at a lower IRQL than the i8042prt.sys driver.

 

 

Send comments about this topic to Microsoft
http://www.zndev.com 免费源码交换网 ----------------------------- 软件创造价值,驱动提供力量! 淡泊以明志,宁静以致远。 ---------------------------------- 勤用搜索,多查资料,先搜再问。
游客

返回顶部