阅读:1961回复:7
终于把usb to 4 rs232搞定了
非常感谢合作伙伴liuxf66!!!
|
|
沙发#
发布于:2004-03-04 12:58
大家好!
看到您们USB---RS232 的产品已经做出来了,我为你们感到高兴! 最近我也在做 USB---RS232 的驱动,有好多不会的,能帮我一把吗? |
|
板凳#
发布于:2004-03-04 13:10
他在一年前就搞定了
|
|
|
地板#
发布于:2004-03-04 14:12
上次,楼主好像给了部分代码!已经贴出来了!楼楼上上的可以找找!
|
|
|
地下室#
发布于:2004-03-04 16:49
关键我没找到他的部分帖子
谁知道他的email吗? 班竹知道吗? 哪个哥们看到这类帖子帮我留意一下,兄弟有情后补呀! my email: caojian8518@126.com choiceman@126.com |
|
5楼#
发布于:2004-03-05 13:02
sunkai兄:我也在做pdiusbd12+p89c51+rs232,忙了一段时间,还是没有头绪,能否指点一二?谢谢! :)
liuyun08@sina.com |
|
|
6楼#
发布于:2004-03-06 11:00
我也刚刚搞定usb to serial.
其实代码量不是很多。usb部分可以用ddk中的例子bulkusb.然后在它上面加一层过滤驱动,这个过滤驱动的作用是用来枚举出串口设备。 串口设备的代码可以从ddk中的例子serial.sys中修改得到。如果你想在串口上再枚举出其他设备(例如modem, fax),可以直接利用windows中已有的驱动程序serenum.sys. |
|
7楼#
发布于:2004-03-22 17:01
Your customer can make a device with 3 USB ports, 4 RS232 ports, and PS/2 keyboard and mouse ports using a FT8U100AX and three FT232BMs. As you say, the FT8U100AX already has one serial port, so only 3 FT232BMs are needed to give the device 4 RS232 ports. As long as your customer uses the most recent version of our VCP driver they can leave out the 93C46's that are connected to the FT232BMs.
See the attached diagram for an example. 非常高兴能与你联络,还请多支持。我们卓杰科技是IC专业代理商,系台湾IC+(用于光纤收发器,以太网交换机,无线局域网等)和英国FTDI CHIP(USB-RS232,485)芯片香港及大陆总代理 李友富(Ken Lee) Cyberwin Technology Ltd. (Shenzhen Office) Add.: Unit 1402, 14/F., News Building, 2 Shennazhong Road, Shenzhen City Tel.: 0755-82092063/4, 82091099 Fax: 0755-82091884 monile phone : 13828832574 E-mail: kenlee@cyberwin.com.cn Web site: www.cyberwin.com.cn |
|
|