阅读:1163回复:5
紧急求助!!怎样修改98DDK帮助文档中的提供的打印机驱动程序的属性页?
请教各位高手,怎样才能在98打印机驱动程序属性页上增加控件?UNITOOL只能增删选项,好象还不能增加新的控件。
|
|
沙发#
发布于:2003-03-13 00:11
你问的问题我也非常关注
另外请您不吝赐教 98下的16位打印驱动程序怎样编译和连接呀? vc6.0下build总报错。 要用vc4.0吗? |
|
板凳#
发布于:2003-03-13 18:56
You must use 16-bit compiler such as vc1.52,which you can
find in this website |
|
地板#
发布于:2003-03-13 19:04
why do it under win98?
I have heard that it is quite easier to implement this under win2k due to its nice driver model, and you may use vc6 |
|
地下室#
发布于:2003-03-14 02:15
是98下的高手吗?
多说两句何妨? 2000下的,不才已然开发好了,但谁让客户都用该死的瘟酒吧呢? |
|
5楼#
发布于:2003-03-14 15:32
前面老哥说的很对,98下的必须要有VC1.5库,99年、2000年的时候兄弟还做过瘟31下面的打印机驱动呐!那个时候我好像极少碰VC,一般都是写了MakeFile,然后去nmake。
|
|
|