阅读:1744回复:2
PCI9052的eeprom
我的9052的eeprom选的是93s46,但是用PLXMON的时候写寄存器的按钮总是灰色的,不能使用,最下面显示EEPROM型号未知,请问是否一定要用93cs46,但是我看到echlon的一块卡用的是93S46,工作是正常的,但是我用PLXMON去读寄存器的值时,仍然什么都读不到。希望用过的高手指点,谢谢
|
|
最新喜欢:hapi |
沙发#
发布于:2001-10-17 22:46
不一定要用93S46,对于9050和9052,PLX推荐使用的eeprom为
Fairchild Semiconductor 1K FM93CS46 Note: Must have sequential read function Holtek Semiconductor 1K HT93LC46 Note: For HT93LC46, ORG pin must be tied to VCC for 16-bit Integrated Silicon Solution 1K IS93C46-3 Note: No restrictions Microchip Technology 1K 93AA46 1K 93C46B 1K 93LC46B Note: Cannot use x8 devices (Cannot use 93Cx6A or 93LCx6A) Note: For 93AA46, ORG pin must be unconnected or tied to VCC for 16-bit organization Rohm Microelectronics 1K BR93LC46 Note: No restrictions Seiko Instruments 1K S-93C46A Note: Cannot use "U" devices (Do not support 5V operation) ST Microelectronics 1K M93C46 1K M93S46 Note: Cannot use "R" devices (Do not support 5V operation) Note: For M93C46, ORG pin must be unconnected or tied to VCC for 16-bit organization PLX认为可以替代的器件为: Atmel Corporation 1K None Note: Atmel does not have sequential read function Catalyst Semiconductor 1K None Note: CAT93C46 does not have the sequential read function Microchip Technology 1K 93LC46B Note: Cannot use x8 devices (Cannot use 93LC46A) |
|
|
板凳#
发布于:2001-10-22 00:07
别忘了给分!
|
|
|