有关驱动程序安装的问题

   对于用driverworks wizard 生成的*.inf文件，要做怎样的修改，才能将相应的驱动程序安装上，谢谢！

在inf中如下修改就可以了：
IOConfig=4@0234-0237%ffff(ffff::)  
;; TODO: You must replace START and END in the line above with the correct I/O addresses (hex).
;;If the device decodes only 10 bits of I/O, replace ffff
;;with 3ff.
IOConfig=2@022A-022B%ffff(ffff::) ; IoPortRange1;
;; TODO: You must replace START and END in the line above with the correct I/O addresses (hex).
;; If the device decodes only 10 bits of I/O, replace ffff with 3ff.
DMAConfig=W:6
;; TODO: You must replace DMACHANNEL in the line above
;;with the correct channel for your device.
;;For channels 4-7 prefix the channel number with "W:",
;;e.g. DMAConfig = W:5

其他的修改可以看文件中的提示。
如果不行将你的要求和inf发给我。
          

不错

0,怎么每分?